Topcon GR-3 GPS GLONASS 450-470 MHz RTK Base & Rover w/ FC-2000 Field Controller

Topcon GR-3 GPS GLONASS

Topcon GR-3 GPS GLONASS Base Antenna [ID-
X1561]
Topcon GR-3 GPS GLONASS
Rover Antenna [ID- X1558]
Topcon
FC-2000 Field Controller Data Collector[ID- X1557]
– GPS
– GLGONASS
– L1
– L2
– Cinderella
– Code Differential Base
– Code Differential Rover
– RTK Base
– Co-Op Tracking
– Multipath Reduction
– USB Port
– RAIM
– Datums Support
– Magnetic Azimuth
– Geoid Height
– RTM3 Input
– CMR Output
– CMR Input
– Carrier Phase
– TPS Output
– N-Beam
– 450 – 470 MHz Radio
– Serviced By A Topcon Authorized Service Center
– GPS
– GLONASS
– L1
– L2
– Cinderella
– Code Differential Base
– Code Differential Rover
– RTK Base
– Co-Op Tracking
– Multipath Reduction
– USB Port
– RAIM
– Datums Support
– Magnetic Azimuth
– Geoid Height
– RTCM3 Input
– CMR Output
– CMR Input
– Carrier Phase
– TPS Output
– N-Beam
– 450 – 470 MHz Radio
– Serviced By A Topcon Authorized Service Center
– Topsurv
Software Version 7.5
– Optical
– GPS+
– Roads
– mmGPS

Topcon GR-3 G3
GNSS Receiver

Topcon’s GR-3 receiver, the next generation of system design and
tracking technology, is now available with a completely new digital UHF
radio system utilizing DSP technology. This technological advancement
delivers far greater reliability and performance than older analog UHF
technology of the past and sets new standards for performance, accuracy
and innovative design.

GPS receiver design has taken a quantum leap forward with the new GR-3.
It starts with 72 “universal” channels that support all current and
planned satellite positioning signals. Then there’s the micro-tuned,
precision antenna capable of receiving all G3 positioning signals with
Topcon’s patented center-mount radio antenna for superior signal
tracking and interference reduction.

The GR-3 receiver incorporates a unique dual communication system,
featuring both cellular and radio technology. Offering a 915 MgHz
Spread Spectrum internal Tx/Rx* or Digital UHF radio, the GR-3 can
serve roles as either an RTK base or rover system.
*915 MgHz Spread Specturm radio technology is not approved for use in
Europe or Asia

Features:

  • Digital UHF or Spread Spectrum
    radio
  • Advanced Rugged System Design
  • 72 Universal Tracking Channels
  • RTK 10Hz position and raw
    observation
  • Bluetooth Wireless Technology
  • G3 Satellite Tracking (GPS,
    Glonass, Galileo)

Topcon GR-3

Specifications:

Tracking
Signal GPS/GLONASS L1/L2/L5 C/A and P
Code & Carrier, Gallileo E 1/2/5a and L1, WAAS/EGNOS
Channel 72
Cold Tracking <30 seconds
Warm Tracking <5 seconds
Reacquisition <1 seconds
Accuracy
Static 3mm +.5ppm horizontal, 5mm +
.5ppm vertical
RTK/Kinematic 10mm + 1 ppm horizontal, 15mm +
1 ppm vertical
DGPS > .25m Post Processing, <
.50m Real time
Physical
Enclosure Magnesium I-beam Housing,
Waterproof construction
Dimensions W: 158 x D: 158 x H: 234.5 mm
Weight 1.78 kg
Color Topcon Grey/Yellow
Environmental
Operating Temperature -20 to +50 degrees Celsius
Storage Temperature -20 to +35 with batteries, -40
to +75 without batteries degrees Celsius
Waterproof IP66
Drop 2 m
Power
Internal Battery 2 Li-Ion, 3900mAh, 7.2V
Operating Time 14 Hours
External Power 1 port(s)
Battery Charger Dual Li-Ion “Smart” charger with
optional Alkaline battery pack. Charger doubles as external power source
Communication
Bluetooth Bluetooth standard 1.2
USB 1.1 Version
Key and LED
Key Two keys, Power ON/Off and
Function Start/stop data logging, switch to extended information mode
LED 6, one for receiver status, data
recording indication, TX/Rx, Bluetooth status and 2 for indication of
each battery charge level
Memory
Internal Memory Environmentally protected,
removable SD™ media card slot
Capacity 1024 MB
Connectors
External Power Port 1 port(s), DC Jack Type A ODU
External Antenna Connector reverse tnc/bnc modem connector
SD Card Slot 1 slot, Memory I/O
Serial Port 1 port(s), RS232 ODU

Topcon FC-2000 Field
Controller

Topcon’s new field controller has all the same great features as the
FC-1000 but now with a color screen. The FC-2000, represents the most
powerful controller combinations in the industry. Finally, a Single
Source Solution for all of your field controller needs!

Features:

  • Ultra-bright, TFT sunlight-active, color touch screen display
  • Powerful 400MHz Intel Xscale processor
  • Windows CE® operating system
  • Expanded keyboard (56 key keyboard with separate alpha and
    numeric)
  • Removable Compact Flash Card
  • 2 comm Ports (9-pin serial,6-pin instrument) / USB Port
  • Removable Li-Ion Batteries

Rugged Design
The FC-2000 was built to withstand the rugged use required in the
field. A shockproof and waterproof design is only the beginning for
this advanced controller.

The keyboard is designed to be easy to use whether you are wearing
gloves in the cold, or suffering through the summer heat. The unit even
has a hook on the back to hang the FC-2000 on the tripod leg!

Topcon GR-3 GNSS GPS

Specifications:

Microprocessor Intel PXA255 X-Scale
Processor Speed 400MHz
Operating System Windows CE.Net (4.2)
Memory 32MB SDRAM with flash ROM 2MB
32MB flash disk (internal)
Data Card Removable CompactFlash®
Bluetooth® Wireless Technology
Capable
Yes
Display 320 x 240 QVGA (landscape)
Color Sunlight Readable TFT
Backlight Frontlight (CCFL)
Keyboard 56 key keyboard with separate
alpha and numeric
Serial RS-232C serial (6pin)
RS-232C serial (D-sub 9)
USB
External Power Yes
Audio Sealed Speaker (mono)
Sealed Microphone
Environmental Waterproof IP-66
Operating Temperature -20°C to +60°C
Batteries Removable Li-ION rechargeable
Operation 6+ Hours Single battery
Dimensions 255 x 130 x 61.5mm
Weight 800g (including batteries)

 

Topcon GR-3 GPS GLONASS Base & Rover Kit w/ Topcon FC-2000 Field Controller
* Topcon GR-3 GPS GLONASS Base Antenna w/ Options… [ID- X1561]
– GPS
– GLGONASS
– L1
– L2
– Cinderella
– Code Differential
Base
– Code Differential
Rover
– RTK Base
– Co-Op Tracking
– Multipath Reduction
– USB Port
– RAIM
– Datums Support
– Magnetic Azimuth
– Geoid Height
– RTM3 Input
– CMR Output
– CMR Input
– Carrier Phase
– TPS Output
– N-Beam
– 450 – 470 MHz Radio
– Serviced By A Topcon
Authorized Service Center
* Topcon GR-3 GPS GLONASS Rover Antenna w/ Options… [ID- X1558]
– GPS
– GLONASS
– L1
– L2
– Cinderella
– Code Differential
Base
– Code Differential
Rover
– RTK Base
– Co-Op Tracking
– Multipath Reduction
– USB Port
– RAIM
– Datums Support
– Magnetic Azimuth
– Geoid Height
– RTCM3 Input
– CMR Output
– CMR Input
– Carrier Phase
– TPS Output
– N-Beam
– 450 – 470 MHz Radio
– Serviced By A Topcon
Authorized Service Center
* Topcon FC-2000 Field Controller Data Collector [ID- X1557]
– Topsurv Software
Version 7.5
– Optical
– GPS+
– Roads
– mmGPS
* Topcon BC-30 Battery Charger
* QTY. 2 Antenna’s
* Topcon Serial Transfer Cable
* Topcon GPS+ Software Version 6.04
* QTY. 6 Battery Packs
* Stylus
* QTY. 3 AC Adapter/Battery Chargers
* QTY. 3 Power Cords
* QTY. 2 Hard Copy User Manuals
* Bracket For FC-2000
* QTY. 2 Hard Carrying Cases

Buy, Sell, New, Used, Topcon GR-3 GPS GLONASS Price

Topcon GR-3-1 Spec Sheet