Ultra-compact, multi-constellation receiver
Topcon’s HiPer SR receiver is a lightweight and completely integrated GNSS receiver for static and cable-free stop-and-go kinematic applications.
Patented Topcon technology
The integrated receiver design includes a GNSS receiver board with patented Vanguard™ technology and industry-leading Fence Antenna™ for precision measurements and advanced multipath rejection.
Tracks all signals, current and future
In addition, the HiPer SR comes with Topcon’s Universal Tracking Channel feature. Unlike other GNSS receiver designs where satellite systems or signals must be dedicated to specific channels, the HiPer SR has a 226-channel chip that enables it to track any available signal including GPS and GLONASS and ‘scale up’ as future signals are released.
The HiPer SR may only weigh 800gm and be small enough to fit in the palm of your hand, but it is built tough! Designed to withstand a 2m drop to concrete on the pole, its magnesium alloy housing and IP67 environmental rating means you can rely on its performance even in the harshest conditions.
Flexible for multi-application use
This 100% integrated receiver operates cable-free, with no antennas, battery doors or connectors to worry about. Use in a pair as a cost effective base and rover RTK solution or with Topcon’s LongLink communication system for small site-wide jobs.
You can use the HiPer SR on its own for static GNSS or add network functionality and cellular-enabled controller to create the perfect Network RTK rover.
Topcon Hiper SR Specifications
Number of Channels: 226 Universal Tracking Channels w/ Vanguard Technology
Signals Tracked: GPS: L1 C/A, L1, L2P(Y), L2, L2C code and carrier
GLONASS: L1 C/A, L1P, L2 C/A, L2P code and carrier
SBAS (WAAS/EGNOS/MSAS) L1 code and carrier
QZSS L1 code and carrier
Antenna Type: Integrated Antenna w/ internal ground plane
Technology: Quartz Lock Loop, Intelligent Tracking Optimization
Topcon AMR, Universal Tracking Technology
RTK (L1+L2): H: 10 mm + 1.0 ppm; V: 15 mm + 1.0 ppm
Static: Fast Static (L1)
H: 3 mm + 0.8 ppm; V; 4 mm + 1.0 ppm
Fast Static (L1+L2)H: 3 mm + 0.5 ppm; V:; 5 mm + 0.5 ppm
Kinematic (L1, L1+L2)
H: 10 mm + 1.0 ppm; V: 15 mm + 1.0 ppm
DGPS: < 0.4 m
SBAS: < 0.6 m
Autonomous: < 1.2 m
Maximum Data Rate: 20 Hz
RTK Broadcast: LongLinkTM 300m+ Range,
Maximum of 3 simultaneous rovers
USB: Yes, Client
Data & Memory
Memory: 4GB internal (non-removable)
RT Data Output: TPS, RTCM SC104 v 2.x, 3.x; CMR/CMR+
ASCII Output: NMEA 0183 version 2.x and 3.0
Dimensions: 150 (W) x 150 (D) x 64 (H) mm
6 (W) x 6 (w) x 2.5 (H) inch
Weight: 850 gms, 1.87lbs
Status Display / Panel: MINTER
Ext Power Connector: Yes
Operation Time: Up to 20 hours
Operating temp: -20ºC to +65ºC with internal batteries
-40ºC to +65ºC without internal batteries
Storage temp: -40ºC to +70ºC
Humidity: 100%, condensing
Water & Dustproof: IP67 rating (1 meter submersion, fully dustproof)
-1 Support for Galileo will be incorporated into HiPer SR when the constellation has matured and is ready
for commercial use. Topcon’s HiPer SR receiver is a lightweight and completely integrated GNSS receiver for static and cable-free stop-and-go kinematic applications.
Topcon Hiper SR GNSS GPS Receiver