Trimble SPS780 Extreme 900 MHz GPS Receiver

Trimble SPS780 Extreme 900 MHz

Trimble SPS780 Extreme GPS Receiver

The Trimble® SPS780 Smart GPS Antenna is the simple solution to all your site measurement and stakeout applications. The rugged smart antenna includes an integrated radio, GPS receiver, GPS antenna and battery in a single, lightweight housing designed for maximum portability, quick setup and optimal flexibility.

The SPS780 Smart GPS Antenna offers contractors an easy-to-use, wide area measurement system for a variety of site preparation and grade checking applications. It can be used as either a rover for site measurement and stakeout or as a base station for site measurement and machine control operations. As a base station, the SPS780 takes little or no setup time and only requires a single keystroke each day to start up.

Features:

  • Small, lightweight design – 1.31 kg (2.89 lb) (receiver only with battery) 3.7 kg (8.16 lb) complete system weight (Rover including controller and rod)
  • Quick setup, high mobility base and rover receiver system ideal for small to mid size jobsites and for working on multiple jobsites on a daily or weekly basis
  • 24-channel L1/L2 GPS receiver
  • Performs all site measurement and stakeout operations within >5 km (Max or Extreme)
  • Internal, removable, smart Li Ion battery provides up to 5.5 hrs GPS rover operation per battery. Batteries can be changed when flat, and returned to office or truck for charging leaving the receivers working in the field.
  • Bluetooth® wireless technology for cable free, no hassle base or rover operation
  • Simple keypad with on/off key and LED indicators for power, radio and satellite tracking
  • 10 Hz update rate
  • Allows measurement from a moving platform e.g. mounted on a vehicle, boat or ATV for increased efficiency on large jobsites.
  • Base/Rover receiver interchangeability for ultimate GPS fleet flexibility
  • Unrestricted rover operation range from the base station
  • Either receiver can operate within a VRS network for base station-free rover capability
  • L2C GPS signal modernization capability for enhanced performance in tough GPS environments

Trimble SPS780

Specifications:

General characteristics
Keyboard and display On / Off key for one button start up
LED indicators For satellite tracking, radio link reception and power monitoring
Receiver type Fully integrated “Smart” GPS antenna
Physical characteristics
Dimensions (WxH) 19 cm (7.5 in) x 10 cm (3.9 in) including connectors
Weight 1.28 kg (2.88 lb) receiver only with internal battery
3.70 kg (8.16 lbs) complete system weight (Rover including controller and pole)
Temperature
Operating
Storage
–40 °C to +65 °C (–40 °F to +149 °F)
–40 °C to +75 °C (–40 °F to +167 °F)
Humidity 100%, condensing
Waterproof IPX7 for submersion to depth of 1 m (3.28 ft)
Shock and vibration
Shock – non operating
Shock – operating
Vibration
Tested and meets the following environmental standards:
Designed to survive a 2m (6.6 ft) pole drop onto concrete
To 40 G, 10 msec, sawtooth
MIL-STD-810F, FIG.514.5C-1
Performance characteristics
Measurements Advanced Trimble Maxwell™ Custom GPS chip

  • High-precision multiple correlator for L1 and L2 pseudorange measurements
  • Unfiltered, unsmoothed pseudorange measurements data for low noise, low multi-path error, low time domain correlation and high dynamic response
  • Very low noise L1 and L2 carrier phase measurements with <1mm precision in a 1 Hz bandwidth
  • L1 and L2 Signal-to-Noise ratios reported in dB-Hz
  • Proven Trimble low elevation tracking technology
  • 24 Channels L1 C/A Code
  • L1/L2 Full Cycle Carrier
  • WAAS/EGNOS support
  • Trimble R-Track™ technology for tracking the new L2C Civil Signal – GPS modernization
Code differential GPS positioning
Horizontal accuracy
Vertical accuracy
±(0.25 m + 1 ppm) RMS
±(0.5 m + 1 ppm) RMS
WAAS differential positioning accuracy Typically <5m 3D RMS
Real Time Kinematic (RTK) positioning
Horizontal
Vertical
±(10 mm + 1 ppm) RMS, ±(0.032 ft +1 ppm) RMS
±(20 mm + 1 ppm) RMS, ±(0.065 ft +1 ppm) RMS
Initialization time
Regular RTK operation with base station
Single/Multi-base minimum 10 seconds + 0.5 times baseline length
in km, up to 30 km
RTK operation with Scalable GPS
infrastructure
<30 seconds typical anywhere within coverage area
Initialization reliability Typically >99.9%
Electrical characteristics
Power 11 to 28 VDC external power input with over-voltage protection on Port 1 (7-pin Lemo)
Battery Rechargeable, removable 7.4 V, 2.0 Ah Lithium–Ion battery in internal battery compartment.
Power consumption <2.5 W, in RTK mode with internal radio
Rover operation times on internal battery
450 MHz systems
900 MHz systems
Receive only 5.5 hrs; varies with temperature
Receive only 5.5 hrs: varies with temperature
Base station operation times on internal battery
450 MHz systems
900 MHz systems
Approximately 3.5 hrs; varies with temperature
Approximately 5.5 hrs; varies with temperature
Certification Class B Part 15, 22, 24 FCC certification, Canadian FCC, CE mark approval and C-tick approval
Communications characteristics
Communications Port 1 – 3-wire RS-232 (7-pin 0S Lemo)
Port 2 – Full RS-232 (Dsub 9-pin)
Fully integrated, fully sealed 2.4 GHz Bluetooth
Integrated Radios

450MHz Transmitter radio power output

Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX
Fully integrated, fully sealed internal 900 MHz, RX only0.5 w
Receiver position update rate
SPS780 Extreme
1 Hz, 2 Hz, 5 Hz, and 10 Hz positioning
Data Input and Output CMR II, CMR+, RTCM 2.1, RTCM 2.3, RTCM 3.0
Outputs 14 NMEA, GSOF and RT17
Carrier Supports BINEX and smoothed carrier

Trimble SPS780 GNSS GPS

Trimble SPS780 Extreme 900MHz L1 L2 L2CS RTK GPS Base or Rover Receiver
w/ Options…
– CMR Inputs
– CMR Outputs
– RTCM Inputs
– RTCM Outputs
– Data Collector
– Binary Outputs
– Bluetooth
– L2CS
– UHF Transmit
– Firmware Options
– 902 – 928 MHz Radio Module P/N: 53620-90
– Serviced By A Trimble Authorized Service Center

* Trimble SPS780 Extreme Receiver P/N: 55086-90 [ID- X1087] w/
Options…
– CMR Inputs
– CMR Outputs
– RTCM Inputs
– RTCM Outputs
– Data Collector
– Binary Outputs
– Bluetooth
– L2CS
– UHF Transmit
– Firmware Options
– 902 – 928 MHz Radio
Module P/N: 53620-90
– Serviced By A
Trimble Authorized Service Center
* Trimble Data Cable P/N: 46125-00
* Trimble Cable P/N: 50012-00
* Trimble Antenna
* Trimble Battery Charger w/ AC Adapter & QTY. 4 International
Adapters
* Trimble SPS77X780 GPS Receivers Software
* QTY. 2 Battery Packs
* Power Cord
* RS232 PC Interface Cable
* Hard Carrying Case

Buy, Sell, New, Used, Trimble SPS780 Extreme 900 MHz Price

Trimble SPS780 Spec Sheet