Trimble SPS852 Base Receiver w/ Zephyr 2 Rover Antenna & TSC2 Controller

Trimble SPS852 Base Receiver

Trimble
SPS852 Installed Options [ID- X1501]
Trimble
TSC2 Installed Options [ID- X1500]

– CMR Inputs
– CMR Outputs
– RTCM Inputs
– RTCM Outputs
– TrimCAN
– Data Collector
– Moving Base
– Data Logging
– Bluetooth
– L2CS
– UHF Transmit
– LBand
– Enable Webserver
– Login Required
– Firmware Option
– No Internal Radio Installed
– Serviced By A Trimble Authorized Service Center

– GNSS Surveying
– TS Surveying
– Advanced Geodetic Support
– Trimble Access Version 12.50 Software

Trimble SPS852 Modular GPS Receiver

FLEXIBLE RECEIVER FOR JOBSITE MEASUREMENT
Whether you need a reliable GNSS base station or a rugged rover, the Trimble® SPS852 GNSS Modular Receiver gives you the flexibility to do all of your construction site measurements. As a permanent or semi-permanent base station, it provides GNSS corrections for site measurements and machine control. As a rover, it can move easily from a site supervisor truck to a pole mount for grade checking, site measurement and stakeout.

The versatile SPS852 receiver is available in a range of options to suit your jobsite or marine construction performance requirements. Simply purchase the receiver that you need today, and upgrade as your needs change.

Secure and Easy to Use
The Trimble SPS852 is comprised of an integrated GNSS receiver and radio plus a choice of external antenna. The receiver can be placed in a secure environment such as the job trailer or boat cabin where it is protected from theft and weather. The less expensive antenna can be placed in a location with clear visibility to the sky and maximum radio coverage.

You don’t have to be a GNSS expert to use the SPS852. Integrated 900 MHz license-free radio and interface with Trimble SCS900 Site Controller Software make the SPS852 easy to use, fast to setup and more productive on the job. Trimble Autobase™ technology means anyone on the jobsite can perform daily base station set up with one button push.

For more advanced troubleshooting, the receiver’s web interface allows your GNSS manager to remotely monitor base station performance, availability, and configuration. No need for time-consuming and costly visits to the base station to set up each day or diagnose issues that may arise.

You don’t have to be a GNSS expert to use the SPS852. Integrated 900 MHz license-free radio and interface with Trimble SCS900 Site Controller Software make the SPS852 easy to use, fast to setup and more productive on the job. Trimble Autobase™ technology means anyone on the jobsite can perform daily base station set up with one button push.

For more advanced troubleshooting, the receiver’s web interface allows your GNSS manager to remotely monitor base station performance, availability, and configuration. No need for time-consuming and costly visits to the base station to set up each day or diagnose issues that may arise.

The fully upgradable SPS852 GNSS Modular Receiver can be configured in a variety of ways, for example:

  • As a base station only
  • As a rover only with SBAS, Location, or Precision RTK accuracy
  • As a flexible base or rover with Precision RTK accuracy

The SPS852 can be combined with the Trimble SPS552H Heading Add-on Receiver, for applications on cranes, construction vessels, and dredges where the position and orientation are important in real-time.

Speciifcations:

GENERAL
Keyboard and display Vacuum Fluorescent display 16 characters by 2 rows. Invertable. On/Off key for one-button startup
Dimensions (L × W × D) 24 cm × 12 cm × 5 cm (9.4 in x 4.7 in x 1.9 in)
Weight 1.65 kg (3.64 lb) receiver with internal battery and radio 1.55 kg (3.42 lb) receiver with internal battery and no radio
ANTENNA OPTIONS
GA530 L1/L2/L2C GPS, SBAS, and OmniSTAR
GA810 GPS, Glonass, OmniSTAR, SBAS, Galileo (optimized for OmniSTAR)
Zephyr™ 2 L1/L2/L2C/L5 GPS, Glonass, OmniSTAR, SBAS, Galileo
Zephyr Geodetic™ 2 L1/L2/L2C/L5 GPS, Glonass, OmniSTAR, SBAS, Galileo
Zephyr 2 Rugged L1/L2/L2C/L5 GPS, Glonass, OmniSTAR, SBAS, Galileo
ENVIRONMENTAL
Operating -40 °C to +65 °C (-40 °F to +149 °F)
Storage -40 °C to +80 °C (-40 °F to +176 °F)
Humidity MIL-STD 810F, Method 507.4
Waterproof IP67 for submersion to depth of 1 m (3.3 ft), dustproof
Pole drop Designed to survive a 1 m (3.3 ft) pole drop onto a hard surface
MEASUREMENTS 220-channel L1C/A, L1/L2/L2C. Upgradable to L5 and GLONASS L1/L2C/A, L1/L2P Full Cycle Carrier
Galileo
Trimble EVEREST™ multipath signal rejection
4-channel SBAS (WAAS/EGNOS/MSAS)
CODE DIFFERENTIAL GPS POSITIONING
Horizontal accuracy 0.25 m + 1 ppm RMS (0.8 ft + 1 ppm RMS)
Vertical accuracy 0.50 m + 1 ppm RMS (1.6 ft + 1 ppm RMS)
REAL-TIME KINEMATIC (RTK UP TO 30 KM) POSITIONING
Horizontal accuracy 8 mm + 1 ppm RMS (0.026 ft + 1 ppm RMS)
Vertical accuracy 15 mm + 1 ppm RMS (0.05 ft +1 ppm RMS)
INITIALIZATION TIME
Initialization reliability >99.9%
POWER
Internal Integrated internal battery 7.2 V, 7800 mA-hr, Lithium-ion
External Power input on 7-pin 0-shell Lemo connector is optimized for lead acid batteries with a cut-off threshold of 11.5 V Power input on the 26-pin D-sub connector is optimized for Trimble lithium-ion battery input with a cut-off threshold of 10.5 V
Power consumption 6.0 W in rover mode with internal receive radio 8.0 W in base mode with internal transmit radio
OPERATION TIME ON INTERNAL BATTERY
Rover 13 hours; varies with temperature
Base station 450 MHz systems . . . . . . . . Approximately 11 hours; varies with temperature
900 MHz systems . . . . . . . . . . Approximately 9 hours; varies with temperature
REGULATORY APPROVALS
  • FCC: Part 15 Subpart B (Class B Device) and Subpart C, Part 90
  • Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
  • Canadian RSS-310, RSS-210, and RSS-119.
  • Cet appareil est conforme à la norme CNR-310, CNR-210, et CNR-119 du Canada.
  • R&TTE Directive: EN 301 489-1/-5/-17, EN 300 440, EN 300 328, EN 300 113, EN 60950, EN 50371
  • ACMA: AS/NZS 4295 approval
  • CE mark compliance
  • C-tick mark compliance
  • UN ST/SG/AC.10.11/Rev. 3, Amend. 1 (Lithium-ion Battery)
  • UN ST/SG/AC. 10/27/Add. 2 (Lithium-ion Battery)
  • RoHS compliant
  • WEEE compliant
COMMUNICATIONS
Lemo (Serial) 7-pin 0S Lemo, Serial 1, 3-wire RS-232 Modem 1 (Serial) 26-pin D-sub, Serial 2, Full 9-wire RS232, using adaptor cable Modem 2 (Serial) . . . .26-pin D-sub, Serial 3, 3 wire RS-232, using adaptor cable
1PPS (1 Pulse-per-second) Available on Marine versions
Ethernet Through a multi-port adaptor
Bluetooth wireless technology Fully-integrated, fully-sealed 2.4 GHz Bluetooth module
Integrated radios (optional) Fully-integrated, fully-sealed internal 450 MHz (UHF) Tx/Rx; Internal 900 MHz Tx/Rx
External GSM/GPRS, cell phone support For Internet-based correction streams
Receiver position update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz, and 20 Hz positioning
Correction data input/output CMR™, CMR+™, CMRx™, RTCM v 2.x & 3.x
Data outputs NMEA, GSOF, 1PPS Time Tags (Marine version)

Trimble SPS852

Trimble TSC2 Controller Data Collector
COMBINE FIELD AND OFFICE IN ONE POWERFUL HANDHELD COMPUTER
The Trimble® TSC2® Controller is an advanced handheld computer especially designed for Trimble optical and GPS surveying systems.
With the Microsoft® Windows Mobile™ 5.0 software operating system, the TSC2 controller runs your choice of powerful Trimble field software. Add specialized applications to the standard Microsoft Outlook Mobile, Excel Mobile, Word Mobile, Power Point Mobile and Internet Explorer programs, and the TSC2 controller becomes a powerhouse of field and office functions on one rugged business device.

SMART, EXPANDABLE HARDWARE
Every innovative feature on the TSC2 controller is designed to make your job easier. Clearly view background maps and check work on the vibrant color graphic display for greater data control and confidence. Use the full alphanumeric keyboard, or quickly select software options using the touch screen.The unique TSC2 controller changeable cap enables the use of removable memory or third-party media, such as GPRS, GPS, camera, and product scanner functions. Extend your data logging capabilities and experience a major leap in productivity.

INDUSTRY-LEADING COMMUNICATION TECHNOLOGIES
Eliminate cable hassles and expedite setup with integrated Bluetooth® wireless technology. When the TSC2 controller is used with a Trimble R8 or 5800 GPS system, the rover is 100% cable free for unsurpassed convenience and ease of use. The internal 2.4 GHz radio option is ideal for use with a robotic system such as the Trimble S6 total station.
Using the expandable media function, a GSM/GPRS modem can add full wireless communication to the Internet in the field.Transfer data in your office over a wireless 802.11 LAN—again, no cables are required. You can also use hotspots to quickly and securely share data with your office from remote locations.

FLEXIBLE COMMUNICATION OPTIONS
Choose the method of data transfer that suits your situation. Using an external modem such as a cell phone with Bluetooth, send and receive files over the Internet from the field: you don’t need to drive back to the office. In the office, internal 802.11 technology provides wireless connection to your network. The TSC2 controller also provides USB and serial RS232 communication options; data can be transferred to a PC or another TSC2 controller using a cable, Bluetooth, CompactFlash, or Secure Digital memory card media.

ONE CONTROLLER, ONE SOFTWARE, ONE INTERFACE
The TSC2 controller is central to Integrated Surveying™ from Trimble. With an application such as the Trimble Survey Controller™ software onboard, collect and manage both GPS and optical data in one Job file simply by switching the TSC2 controller between sensors. Standardize on one flexible controller for maximized investment. And your survey team only needs to know one interface. When field work is complete, simply transfer the Job file to your office using the communication method that suits your needs.

Features:

  • Advanced handheld field computer for exceptional versatility, efficiency, and freedom
  • Microsoft Windows Mobile operating system 5.0 software
  • Highest flexibility for optical and GPS surveying
  • Wireless operations in both the field and office

Specifications:

Physical
Size 266 mm × 131 mm × 48 mm (10.5 in × 5.2 in × 1.9 in);
76 mm (3.0 in) at handgrip
Weight 0.95 kg (2.1 lb) including battery;
1.09 kg (2.4 lb) including battery and
optional internal radio
Memory 128 MB SDRAM, 512 MB internal non-volatile storage memory
Expandable Memory CompactFlash (CF) card
Secure Digital (SD) card
Processor 520 MHz Intel® PXA 270 XScale CPU
Wireless Integrated Wireless LAN 802.11b
Power Li-Ion rechargeable pack, 6600 mAh, battery life
of 30 hours under normal operating conditions
Fast charge to 80% in 2 hours; full charge in 4.5 hours.
Battery charge status LED indicator
Software The Trimble TSC2 controller runs the
Trimble Survey Controller field software. In addition, a number of
regional solutions are available. For more information on the field
software that’s best for you, contact your local
Trimble authorized distribution partner.
Environmental
Temperature
Operating Temperature
–30 °C to +60 °C (–22 °F to +140 °F)
Storage Temperature –40 °C to +70 °C (–40 °F to +158 °F)
Humidity 100% condensing, MIL-STD-810F, Method 507.4
Sand & Dust Protection against wind-driven according
to MIL-STD-810F, and IP6X
Water Waterproof IPX7
Drops 26 drops from 1.22 m (4.0 ft) onto hard surface
Vibration MIL-STD-810F, Method 514.5, Procedure I, Fig. 17 & 18
Altitude MIL-STD-810F, Method 500.4, Procedures I, II & III,
4572 m (15,000 ft) at +23 °C (+73 °F)
Interface
Display Color, illuminated TFT, daylight-readable touch screen
displayed at 320 × 240 pixels
Keyboard 53 key alphanumeric keypad, 8-position spider key
Audio Integrated speaker and microphone for audio system events, warnings and notifications.
Operating system Microsoft Windows Mobile 5.0
Input/Output
Ports RS232 9-pin serial port
USB Client
USB Host
DC Power Port
Expansion 1 × Type I CompactFlash (CF) slot
1 × Type II CompactFlash (CF) slot
1 × Secure Data (SD) memory card slot

Trimble SPS852 GNSS GPS

Trimble Zephyr Model 2 GNSS Antenna
The new Trimble® Zephyr™ 2 and Zephyr Geodetic™ 2 antennas break new ground in GNSS surveying antenna technology. Both antennas support modular Trimble systems such as the Trimble® R7 GNSS and Trimble® 5700 GPS receivers, and can be used as part of the Trimble GNSS Infrastructure solution.

The Trimble Zephyr 2 GNSS antenna is typically used in roving applications. It minimizes multipath, and offers robust low elevation tracking and sub-millimeter phase center repeatability

A Trimble GNSS rover comprising the rugged Zephyr 2 and a receiver such as the Trimble R7 GNSS is extremely flexible: Attach the antenna to the top of a pole, wear it on the purpose-built Trimble backpack, or drive with the Zephyr 2 mounted on the roof of a vehicle. The Trimble Zephyr 2 supports the way you want to work.

COMPREHENSIVE GNSS SUPPORT
The Trimble Zephyr 2 and Zephyr Geodetic 2 antennas offer full support for coming and near-future GNSS signals, including GPS L2C and L5, GLONASS, and even Galileo. This technology future-proofing, in combination with the rugged durability of each antenna, means any investment in a Trimble Zephyr GNSS antenna will last for many years.

Features:

  • Comprehensive GNSS support, including GPS Modernization signals, GLONASS, and Galileo
  • Robust low-elevation satellite tracking
  • Minimized multipath
  • Sub-millimeter phase center repeatability
  • Ideal for fixed reference stations and GNSS infrastructure networks

Specifications:

PERFORMANCE
Broad GNSS Frequency Tracking Band Including:
  • GPS: L1, L2, L5
  • GLONASS: L1, L2, L3
  • Galileo: E1, E2, E5, E6
  • SBAS: WAAS, EGNOS, QZSS, Gagan, MSAS, and OmniStar
  • Quality signal tracking, even below 5 degrees elevation
  • Four point antenna feed for phase center stability and enhanced polarization
  • TNC female signal connector
  • Small cross-sectional area to reduce wind loading
  • 13 dB amplifier margin supports cable runs of over 60 m without special coaxial cable or in-line amplifiers
  • North orientation marking on exterior
  • 50 dB signal gain for reliable tracking in difficult environments
  • Low voltage, low power consumption
  • Integral low noise amplifier
  • 5/8″ x 11 female threaded stainless steel mount point
  • Powered by GNSS receiver via coaxial cable
  • Advanced LNA (low noise amplifier) to reduce jamming by high power out-of-band transmitters
HARDWARE
Dimensions 16.5 cm diameter x 7.6 cm height (6.5 in diameter x 3 in height)
Weight 0.64 kg (1.4 lb)
Operating Temperature –40 ºC to +70 ºC (–40 ºF to +158 ºF)
Humidity 100% humidity proof, fully sealed
Shock and Vibration Tested and meets the following environmental standards:
Shock: MIL-STD-810-F to survive a 2 m (6.56 ft) drop onto concrete
Vibration: MIL-STD-810-F on each axis
Input Voltage 3.5 V DC to 20 V DC
Input Current 125 mA maximum

Trimble SPS852 GNSS Base Receiver w/ Trimble Zephyr 2 Antenna & TSC2 Field Controller Data Collector

Please Note That The SPS852 Needs An External Radio to Transmit
* Trimble SPS852 GNSS Base Receiver w/ Options… [ID- X1501]
– CMR Inputs
– CMR Outputs
– RTCM Inputs
– RTCM Outputs
– TrimCAN
– Data Collector
– Moving Base
– Data Logging
– Bluetooth
– L2CS
– UHF Transmit
– LBand
– Enable Webserver
– Login Required
– Firmware Option
– No Internal Radio
Installed
– Serviced By A
Trimble Authorized Service Center
* Trimble TSC2 Data Collector w/ Options…[ID- X1500]
– GNSS Surveying
– TS Surveying
– Advanced Geodetic
Support
– Trimble Access
Version 12.50 Software
* Trimble Zephyr Model 2 Antenna [ID- X1502]
* Trimble Multi-Port Adapter
* Trimble NetRS To Antenna Cable
* Stylus
* QTY. 2 AC Adapter/Chargers
* Power Cord
* RS232 PC Interface Cable
* USB CP Interface Cable
* User Manual On CD-ROM
* Case For TSC2
* Hard Carrying Case

Buy, Sell, New, Used, Trimble SPS852 Base Receiver Price

Trimble SPS852 Spec Sheet