Trimble SPS985 L1 L2CS GPS Rover Smart Antenna

Trimble SPS985 L1 L2CS GPS

Trimble SPS985 Smart Antenna

Rugged, Reliable Positioning
The ultra-rugged Trimble® SPS985 GNSS Smart
Antenna offers unmatched reliability for
construction site positioning. Ideal for use on small
and large job sites, the SPS985 can serve as a GNSS
rover system or as a Wi-Fi enabled base station for
other GNSS operations including machine control.

Easy-to-Use Rover
The SPS985 is engineered to stand up to the
most dynamic and rugged jobsite measurement
applications. The integrated smart antenna
design and quick release connector make it easy
to transport and set up on a range pole, ATV or
supervisor truck.

The SPS985 can move from one site measurement
application to another with one quick release,
saving set up time and maximizing use time. For
example, a grade checker can mount the SPS985 to
an all terrain vehicle and conduct site topos, check
as-builts, and road center lines in even the roughest
site conditions. The SPS985 can withstand the high
vibration scenarios often seen on ATV-mounted site
work without interruption or fear of damage.

With Trimble SCS900 Site Controller Software,
you can:

  • Determine cut/fill on a range pole, utility vehicle,
    or truck
  • Stake out site or road features, utilities, daylight
    lines and side slopes
  • Measure progress and calculate material
    stockpile volumes
  • Carry out as–built measurements, grade checks
    and laid material thickness checks

The SPS985 integrates numerous timesaving
features in a compact and rugged system. It has
never been so quick and easy to get measuring.
Initial site work and topo can even be done
base station free using satellite delivered GNSS
corrections to the rover.

The Trimble Web UI™ eliminates the need to
travel to the job site for routine monitoring of the
established base station. Now you can assess the
health and status of the base station and perform
remote configurations from the office. Setting a
new standard for rugged reliability, the SPS985
GNSS Smart Antenna keeps your crews working,
not wasting time with GNSS maintenance.

Reliable Base Station
The SPS985 can also serve as a powerful site base
station, using integrated Wi-Fi or optional radio to
send and receive corrections for rover or machine
control work. It is the easiest base station on the
market – just put it on the tripod, switch it on, and
you’re ready to go. The SPS985 will automatically
establish a Wi-Fi connection with the machine radio
or GNSS rover and begin transmitting corrections.

With integrated Trimble 360™ receiver technology,
the SPS985 GNSS Smart Antenna can “see” more
GNSS constellations and signals than traditional
GPS, so you can expect greater accuracy in more
challenging conditions such as under tree canopy
and in urban areas. That also means more uptime
using the system and more productivity for your
job crews.

Trimble SPS985

Specifications:

General
Keyboard and display LED indicators for satellite
tracking
radio link reception and power monitoring
On/Off key for one-button startup
Dimensions (W x D) 12 cm (4.7 in) × 13 cm (5.1 in)
Weight 1.55 kg (3.42 lb) including
radio and battery
Complete system (rover,
controller, pole)
3.9 kg (8.6 lb)
Environmental
Operating –40 °C to +65 °C (–40 °F to +149
°F)
Storage –40 °C to +75 °C (–40 °F to +167
°F)
Humidity 100%, condensing
Waterproof IP67 for submersion to depth of
1 m (3.3 ft), dustproof
Pole drop Designed to survive a 2 m (6.6
ft) pole drop onto concrete
Measurements 440-channel L1C/A, L1/L2/L2C GPS
and QZSS. Upgradable to L5 and
GLONASS L1/L2C/A, L1/L2P Full Cycle Carrier
Galileo
BeiDou
OmniSTAR
Trimble EVEREST™ multipath signal rejection
4-channel SBAS (WAAS/EGNOS/MSAS/QZSS)
Code
Differential GPS Positioning
Horizontal accuracy 0.25 m + 1 ppm RMS (0.8 ft + 1
ppm RMS)
Vertical accuracy 0.50 m + 1 ppm RMS (1.6 ft + 1
ppm RMS)
Real-Time
Kinematic (RTK) Positioning
Horizontal accuracy 8 mm + 1 ppm RMS (0.026 ft + 1
ppm RMS)
Vertical accuracy 15 mm + 1 ppm RMS (0.05 ft + 1
ppm RMS)
Trimble xFill
Horizontal accuracy RTK
+ 10mm/minute RMS
Vertical accuracy RTK + 20mm/minute RMS
Initialization
Time
Initialization reliability (May
be affected by atmospheric conditions, signal multipath, and satellite
geometry.
Initialization reliability is continuously monitored to ensure highest
quality.)
>99.9%
Power
Internal Rechargeable, removable 7.4 V,
2.6 Ah
Lithium-ion battery in internal battery compartment
External External power input with
over-voltage protection
11 V DC to 28 V DC external power input
Power consumption 3.7 W, in RTK mode with internal
radio
Operation
Time on Internal Battery
Rover 4.6 hours; varies with
temperature
Base station with internal radio 3.5 hours; varies with
temperature
Regulatory Approvals
  • FCC Part 15 Subpart B (Class B Device), Part 15.247, Part 90
  • Canadian ICES-003. Cet appareil numérique de la classe B
    est conforme
    à la norme NMB-003 du Canada
  • Canadian RSS-310, RSS-210, and RSS-119
  • Cet appareil est conforme à la norme CNR-310, CNR-210, et
    CNR-119
    du Canada
  • CE mark compliant
  • C-tick mark compliant
  • RoHS compliant
  • WEEE compliant
Communications
Lemo (Serial) 7-pin Lemo 2-key, Power Input,
USB
Bluetooth wireless technology Fully-integrated, fully-sealed
2.4 GHz
Bluetooth module
Integrated radios (optional) Fully-integrated, fully-sealed
Internal 450 MHz (UHF) Tx/Rx;
Internal 900 MHz Tx/Rx
Internal radio output
450 MHz output power
900 MHz output power
0.5 W, upgradeable to 2 W
1.0 W
External GSM/GPRS, cell phone
support
Supported via SCS900
and SPS controller
Receiver position update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz, and
20 Hz positioning
Correction data input/output CMR™, CMR+™, CMRx, RTCM3, RTCM
2.x
(with Rover/Base upgrade)
Data outputs NMEA, GSOF

Trimble SPS985 GNSS GPS

Trimble SPS985 L1 L2CS GPS Rover Smart Antenna w/ Options…
– Data Collector
– Disable L2 Output
– L2CS
– Enable Webserver
– No Static CMR Output
– Login Required
– 900 MHz Internal Radio
– Serviced By A Trimble Authorized Service Center

* Trimble SPS985 Rover Smart Antenna P/N: 82500-95 w/ Options… [ID-
X1317]
– Data Collector
– Disable L2 Output
– L2CS
– Enable Webserver
– No Static CMR Output
– Login Required
– 900 MHz Internal
Radio
– Serviced By A
Trimble Authorized Service Center
* Li-Ion Battery Charger w/ AC Adapter
* Trimble USB To LEMO Cable P/N: 80751
* Antenna
* QTY. 2 Battery Packs
* User Manual On CD-ROM
* Hard Carrying Case (G)

Buy, Sell, New, Used, Trimble SPS985 L1 L2CS GPS Price

Trimble SPS985 Spec Sheet